Engineering Service
Thermal Design
Heat and mass balances, steam systems, boiler duty, energy recovery and system-level design support.
Explore Thermal Design →Thermal Engineering
Engineering Academy resources for process heating and thermal systems: biomass boilers, HRSG, thermal oil heaters, waste heat recovery, heat exchangers, steam systems, combustion and troubleshooting.
Combustion
Combustion
Fuel, air, flame stability, excess air, CO, NOx, burnout and practical combustion troubleshooting.
Open combustion articles →Steam Systems
Steam Systems
Steam accumulators, deaerators, condensate, steam traps, flash steam, blowdown and steam distribution.
Read steam system articles →Heat Transfer
Heat Transfer
Heat duty, approach temperature, fouling, heat recovery and thermal design fundamentals.
Discuss thermal calculations →Heat Exchangers
Heat Exchangers
Shell-and-tube, plate heat exchangers, air heaters, economizers, fouling and troubleshooting.
Explore Heat Exchanger Design →Biomass Boilers
Biomass Boilers
Biomass boiler fundamentals, combustion, troubleshooting, grate issues, slagging and operation workflows.
Open biomass boilers →HRSG
HRSG
Heat recovery steam generators, drum level control, circulation, startup, shutdown and tube failure topics.
Discuss HRSG support →Thermal Oil Heaters
Thermal Oil Heaters
Expansion tanks, fluid degradation, coking, low flow, operation limits and troubleshooting.
Request thermal oil support →Energy Efficiency
Energy Efficiency
Waste heat recovery, stack losses, insulation, heat integration and practical energy-saving checks.
Talk to CADBoostPro →Emissions
Emissions
NOx, CO, oxygen profile, air staging, fuel quality and operating changes that affect emissions.
Talk to Engineering Services →Troubleshooting
Troubleshooting
Systematic diagnosis for thermal equipment problems, combustion issues, failures and operating instability.
Open biomass troubleshooting →O&M
Operation & Maintenance
Inspection, cleaning, monitoring, shutdown checks, maintenance records and reliability workflows.
Talk to CADBoostPro →