Describe the decision
Clarify what the team must approve, reject, diagnose, compare or improve.
Engineering Consulting
A practical entry point for technical problems that are unclear, multidisciplinary or not yet ready for a defined calculation scope.
YOUR ENGINEERING QUESTION
↓
DEFINE • REVIEW • ROUTE
↓
CFD Simulation
Thermal Design
Heat Exchanger
Combustion
Multidisciplinary Consulting
When to use this service
Start here when the solution path is not yet clear
The first objective is to turn a broad concern into a specific engineering question with evidence, boundaries and a useful next decision.
- The problem crosses several engineering disciplines
- The available data is incomplete or inconsistent
- Several vendors propose conflicting solutions
- An independent calculation or document review is needed
- A recurring operating symptom has no confirmed cause
- The team needs a calculation or investigation scope
- A concept must be compared before detailed design
- The request does not fit the four specialist services
Consulting workflow
From an open question to an actionable scope
Small diagnostic steps come first, so effort is directed toward the evidence and calculations that can change the decision.
Organize the evidence
Review drawings, calculations, operating trends, photos, reports and known constraints.
Frame the problem
Separate symptoms, possible causes, assumptions, missing data and acceptance criteria.
Select the method
Choose document review, hand calculation, data analysis, CFD or a staged combination.
Evaluate options
Compare practical alternatives against performance, risk, cost and implementation limits.
Recommend next actions
Document findings, uncertainty, verification needs and the next engineering decision.
Routing
When the request belongs to a specialist service
Engineering Consulting remains the contact point, while the technical work is assigned to the clearest service scope.
Flow and pressure
CFD Simulation
Flow distribution, pressure loss, ducts, manifolds, windboxes and geometry comparison.
Explore CFD Simulation →Heat and utilities
Thermal Design
Heat balances, steam demand, boiler duty, accumulator sizing and heat-recovery screening.
Explore Thermal Design →Equipment duty
Heat Exchanger Design
Thermal sizing, rating, area, pressure-drop and fouling checks for a defined exchanger.
Explore Heat Exchanger Design →Fuel and emissions
Combustion Optimization
Fuel behavior, CO, NOx, air distribution, burnout, slagging and boiler troubleshooting.
Explore Combustion Optimization →Typical engagements
Flexible support with a defined output
The format may be small or multidisciplinary, but each engagement still has an agreed question, evidence set and deliverable.
Independent Technical Review
Review a calculation, concept, report, proposal or vendor comparison and identify assumptions, gaps and decision risks.
Root-Cause Investigation
Structure symptoms and operating evidence into ranked hypotheses, verification checks and corrective actions.
Concept Comparison
Compare engineering alternatives using defined performance, constructability, operating and uncertainty criteria.
Calculation Support
Develop or independently check transparent engineering calculations for a defined technical question.
Scope Development
Convert a broad need into inputs, methods, deliverables, exclusions, acceptance criteria and project stages.
Technical Workshop
Facilitate a focused review with operations, design and project stakeholders to align evidence and next actions.
What you may receive
Typical deliverables
- Problem statement and decision criteria
- Document, calculation or data review notes
- Assumption and missing-information register
- Root-cause hypothesis matrix
- Comparison of technical alternatives
- Calculation package or investigation plan
- Risk, limitation and verification notes
- Prioritized engineering recommendations
What to provide
Useful initial information
- A short description of the problem and when it began
- The decision or outcome your team needs
- Relevant drawings, specifications and calculations
- Operating data, alarms, trends or test results
- Photos, inspection records and modification history
- Known constraints, deadlines and unavailable data
- Previous recommendations or vendor proposals
- Required review or approval standard
Scope and responsibility
Advice tied to available evidence
The consulting output states its data basis, assumptions, exclusions and verification requirements. Preliminary review is not presented as certified detailed design or proof of plant performance.
Important: Plant changes remain subject to site safety procedures, management of change, applicable codes, authorized design review, vendor requirements and field verification.
Not sure where your request belongs?
That is exactly when this service is useful. Send the available information without selecting a specialist category; the initial review can identify the most appropriate route.
Initial enquiry
Describe the decision—not only the symptom
Explain what is happening, what has already been checked and what your team must decide next. CADBoostPro can then propose a focused review or route the request to a specialist service.
Send an engineering enquiry →A useful first message
“At this operating condition, we observe this symptom. These checks have been completed. We need to decide between these options by this date.”